Maipu –TRACK / RTR WITH VRRP

To run VRRP in Local LAN , Last mile (Wan Link) is Fast Ethernet with Maipu routers.

Description : TRACK / RTR function is used to track remote server IP from Master router, as the link down the track function will detect the server status is unavailable, It will reduce VRRP priority by 20, In result Master will become backup. Backup will change to Master.

As the link restored, the highest priority will become master.

This solution is recommended for Wan terminated on FastEthernet, Since Fast Ethernet interface link status will is not down every time in link failure.

Topology:

Master Router Config :

.................

interface fastethernet0

 description ### WAN ###

 ip address 10.1.1.1 255.255.255.252

 load-interval 30

 exit

interface fastethernet1

 description ### LOCAL LAN ###

 ip address 192.168.1.98 255.255.255.248

 load-interval 30

 vrrp 10 ip 192.168.1.100

 vrrp 10 preempt

 vrrp 10 priority 110

 vrrp 10 track 1 20

 exit

ip route 0.0.0.0 0.0.0.0 10.1.1.2

track 1

 rtr 1

 logic operator AND

 exit

rtr 1 icmpecho

 set 192.168.10.5 1 70 2 10 extend 192.168.1.98 

 log type local 100

 exit

#### testing the server IP 192.168.10.5 availability from LAN 192.168.1.98, If it is unreachable then the VRRP will reduce the priority by 20 (110-20 = 90) ####

rtr group 1

 member 1

 exit

### Binding rtr entity with group ###

rtr schedule 1 group 1 start now ageout 6000 life forever

### Starting rtr ###

.........

End

Backup Router Config :

......

interface fastethernet0

description ### WAN ###

 ip address 10.2.2.1 255.255.255.252

 exit

interface fastethernet1

description ### LOCAL LAN ###

 ip address 192.168.1.99 255.255.255.248

 vrrp 10 ip 192.168.1.100

 vrrp 10 preempt

 exit

ip route 0.0.0.0 0.0.0.0 10.2.2.2

....

End

Devices Used :

Maipu 1800 -3

IOS : rp5-i-6.1.25(REL).bin

SHOW COMMANDS

Show rtr entity 1

Show rtr group 1

Show vrrp

For any queries Plz put comments with your mail id. Will reply you soon... 

Maipu Password Breaking Document

For the monitor version starting from 3.24. Plz perform below steps...

Connect router by console port, Power on the Router.

Press “n” key continually till you finish full booting process .

Now You will be in user mode, then go to privilege mode -- > go to filesystem

In Filesystem mode, perform config-file startup

After this you will see old configuration loaded on router. You can do changes in Username and password as required.

SCREEN OUTPUT

Monitor version 3.32 is Booting (press ctrl+c to enter monitor mode) .....

Now start loading system and application programs,

Loading system and application programs, please wait for a while...

n

Use boot parameter 0:

device=flash, filename=/flash/rpl-c-6.1.25(REL).bin

Loading file /flash/rpl-c-6.1.25(REL).bin ...

nnnnnnnnnnnnnnnnnnnnnUncompressing MPROS image n###n##n##n##n##n##n##n##n##n##n##n##n###n##n###n##n#

##n##n##n###n##n#n###n##n###n##n##n##n##n##n##n###n##n##n##n###n###n##n#n#n##n##n##n###n#n###n###n##

n#n###n###n##n###n###n##n##n###n##n##n##n##n##n##n###n#n##n###n##n###n###n##n###n###n##n###n##n##n##

#n###n##n##n###n##n###n##n###n###n##n###n##n###n###n#n#n##n#n#n##n#n#n#n##n#n##n#n#n##n#n##n##n#n##n

#n## OK

Starting at 0x200020...

nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn

               MyPower (R) Operating System Software

MP801E system image file (flash0: /flash/rpl-c-6.1.25(REL).bin), version 6.1.25(REL)(integrity), Com

piled on Nov 14 2008, 19:02:51

Copyright (C) 1999 Maipu (Sichuan) Communication Technology Co., Ltd. All Rights Reserved.

System ID           : 00017a0c0648

Hardware Model      : MPC880 with 64 MBytes SDRAM, 8 MBytes flash

Hardware Version    : 050

MPU CPLD Version    : 004

Monitor Version     : 3.32

Software Version    : 6.1.25(REL)(integrity)

Software Image File : flash0: /flash/rpl-c-6.1.25(REL).bin

Compiled            : Nov 14 2008, 19:02:51

nnn

mount flash file system on dev '/flash' success.

nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn

nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn

nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn

AAT&FE0S0=0                      nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn

nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn

nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn

nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn

nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn

nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn

n

00:00:18: %LINEPROTO-5-UPDOWN: Line protocol on Interface lo0, changed state to up

00:00:23: %LINEPROTO-5-UPDOWN: Line protocol on Interface null0, changed state to upnnnnnnnnnnnnnnnn

nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn

Press any key to start the shell!

00:00:37: %SYS-5-START: System startednnnnnnnnnnnnnnn

router>

router>

router>en

router#fil

router#filesystem

router(config-fs)#dir

  size          date       time       name

--------       ------     ------    --------

6047257    JAN-01-1980  00:04:06   rpl-c-6.1.25(REL).bin  

2048       JAN-01-1980  00:00:36   mpssh             

9041       JAN-01-1980  00:00:38   logging           

10224      JAN-01-1980  00:00:46   history           

670        JAN-01-1980  00:01:42   startup           

2048       JAN-01-1980  00:01:42   rollback          

router(config-fs)#confi

router(config-fs)#config-file ?

                  Appointed file name,such as "/flash/startup"

router(config-fs)#config-file /flash/startup

MAIPU(config-fs)#

MAIPU(config-fs)#

MAIPU(config-fs)#

Process Completed