Maipu Password Breaking Document

For the monitor version starting from 3.24. Plz perform below steps...

Connect router by console port, Power on the Router.

Press “n” key continually till you finish full booting process .

Now You will be in user mode, then go to privilege mode -- > go to filesystem

In Filesystem mode, perform config-file startup

After this you will see old configuration loaded on router. You can do changes in Username and password as required.

SCREEN OUTPUT

Monitor version 3.32 is Booting (press ctrl+c to enter monitor mode) .....

Now start loading system and application programs,

Loading system and application programs, please wait for a while...

n

Use boot parameter 0:

device=flash, filename=/flash/rpl-c-6.1.25(REL).bin

Loading file /flash/rpl-c-6.1.25(REL).bin ...

nnnnnnnnnnnnnnnnnnnnnUncompressing MPROS image n###n##n##n##n##n##n##n##n##n##n##n##n###n##n###n##n#

##n##n##n###n##n#n###n##n###n##n##n##n##n##n##n###n##n##n##n###n###n##n#n#n##n##n##n###n#n###n###n##

n#n###n###n##n###n###n##n##n###n##n##n##n##n##n##n###n#n##n###n##n###n###n##n###n###n##n###n##n##n##

#n###n##n##n###n##n###n##n###n###n##n###n##n###n###n#n#n##n#n#n##n#n#n#n##n#n##n#n#n##n#n##n##n#n##n

#n## OK

Starting at 0x200020...

nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn

               MyPower (R) Operating System Software

MP801E system image file (flash0: /flash/rpl-c-6.1.25(REL).bin), version 6.1.25(REL)(integrity), Com

piled on Nov 14 2008, 19:02:51

Copyright (C) 1999 Maipu (Sichuan) Communication Technology Co., Ltd. All Rights Reserved.

System ID           : 00017a0c0648

Hardware Model      : MPC880 with 64 MBytes SDRAM, 8 MBytes flash

Hardware Version    : 050

MPU CPLD Version    : 004

Monitor Version     : 3.32

Software Version    : 6.1.25(REL)(integrity)

Software Image File : flash0: /flash/rpl-c-6.1.25(REL).bin

Compiled            : Nov 14 2008, 19:02:51

nnn

mount flash file system on dev '/flash' success.

nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn

nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn

nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn

AAT&FE0S0=0                      nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn

nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn

nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn

nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn

nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn

nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn

n

00:00:18: %LINEPROTO-5-UPDOWN: Line protocol on Interface lo0, changed state to up

00:00:23: %LINEPROTO-5-UPDOWN: Line protocol on Interface null0, changed state to upnnnnnnnnnnnnnnnn

nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn

Press any key to start the shell!

00:00:37: %SYS-5-START: System startednnnnnnnnnnnnnnn

router>

router>

router>en

router#fil

router#filesystem

router(config-fs)#dir

  size          date       time       name

--------       ------     ------    --------

6047257    JAN-01-1980  00:04:06   rpl-c-6.1.25(REL).bin  

2048       JAN-01-1980  00:00:36   mpssh             

9041       JAN-01-1980  00:00:38   logging           

10224      JAN-01-1980  00:00:46   history           

670        JAN-01-1980  00:01:42   startup           

2048       JAN-01-1980  00:01:42   rollback          

router(config-fs)#confi

router(config-fs)#config-file ?

                  Appointed file name,such as "/flash/startup"

router(config-fs)#config-file /flash/startup

MAIPU(config-fs)#

MAIPU(config-fs)#

MAIPU(config-fs)#

Process Completed