Maipu 1800 IPv6 Testing - BGP+

MP1800 -xx Series Routers support OSPFv3, IPv6 RIPng, IPv6 IS-IS, IPv6 BGP4+ and static IPv6 routing.

In this section we will use above topology for IPv6 BGP+ testing. 

Configuration Template -

Router-A:

hostname R-A

ip mef

interface loopback0

 ipv6 enable

 ipv6 address 1::1/128

 exit

interface fastethernet0

 ipv6 enable

 ipv6 address 192::1/64

 exit

                            

router bgp 100

 no auto-summary

 no synchronization

 bgp router-id 1.1.1.1

 neighbor 192::2 remote-as 200

 no neighbor 192::2 activate

 address-family ipv6

  network 1::1/128  

###network loopback 0 into BGP+ session, then peer BGP neighbor can learned this routing ###

  neighbor 192::2 activate

  exit-address-family

 exit

Router-B:

hostname R-B

interface fastethernet0

 ipv6 enable

 ipv6 address 192::2/64

 exit

interface fastethernet1

 ipv6 enable

 ipv6 address 193::1/64

 exit

                                 

router bgp 200

 no auto-summary

 no synchronization

 bgp router-id 2.2.2.2

 neighbor 192::1 remote-as 100

 no neighbor 192::1 activate

 address-family ipv6

  neighbor 192::1 activate

  exit-address-family

 exit

Testing Results Output:

On Router - A

On Router - B

Router-B Routing Table:

Router-B can reach to Router-A Loopback 1::1/128.

This above testing is basic testing of IPv6. For more detailed configurations. You can download it from Maipu website.

Hope this post will help you for IPv6 understanding.

Thanks for reading ...